Amiga (Various)

AV Pinout (Amiga Personal Computers)

The personal computer range of Amiga consoles (500/600/1000/1200 and so on) use the Amiga Video Connector standard for t...

Kickstart ROMs (Amiga)

There are many versions both official and unofficial of the BIOS used in the Amiga line of computers. The BIOS that is r...

PC Floppy Drive In Amiga

A common problem with the Amiga consoles is their dying Floppy Disk drives is they start to fail over time, and due to t...

📄 Amiga Floppy Disk On PC

The best way to access the Amiga floppy disks on PC is to use a Greaseweazle . Buy the Greasleweazle PCB, then connect ...

Gotek FlashFloppy (Amiga)

The Gotek is a great device that emulates being an Amiga floppy disk. You can use it in place of an internal drive by si...

📄 X-Copy Clone Disks (Amiga)

A great way to make fresh Amiga game floppy disks is to use a real Amiga, withX-Copy. Once X-Copy is booted (from a Flop...

Clone Amiga Hard Drive to PC (Amiga)

If you want to clone an Amiga hard drive and back it up to a file to PC, for use in WinUAE or just as a backup ready to ...

DiagROM (Amiga 500)

If you swap the Kickstart ROM for a DiagROM chip you can run the diagnostics programs. Insert the diagnostics ROM into t...

📄 LHA Extractor Install (Amiga)

One of the most useful tools for Amiga is the LHA program. This allows you to extract .lha files. Download lha.run . ...

WHDLoad Install (Amiga)

WHDLoad allows you to play games directly from a hard drive on the Amiga, instead of loading from floppy disk. Installat...

PiStorm Emu68 Imager (Amiga)

The best way to setup the SD card for the PiStorm is using the Emu68 Imager app. This tool will: Pre-format and partit...

📄 PiStorm Flash CPLD (Amiga)

With any PiStorm board, whether using PiStorm or Emu68 you will first need to program/flash the CPLD that is on the adap...

PiStorm Emu68 SD Card (Amiga)

Once you have flashed your Raspberry Pi and CPLD with PiStorm, it is time to prepare an SD card that will boot using Emu...

PiStorm Emu68 Format Drives (Amiga)

Once you have the Emu68 installed on an SD card with the type 76 partitions, you will need to format it a little differe...

📄 HDF to Emu68 (Amiga)

The best way to configure your Amiga if you are using a PiStorm and Emu68 is to first do the full install, setup and cop...

Loading File on Startup (Amiga)

There are various ways to run files and executables at startup. A good example is running anitclick to stop the floppy...

Creating Shortcut On Desktop (Amiga)

Sometimes when you have installed something like a WHDLoad game, you want shortcuts of those games in a different place ...